DEV Community

# homelab

Showcasing and discussing personal lab setups for security practice and research.

Posts

👋 Sign in for the ability to sort posts by relevant, latest, or top.
Homelab Bakeoff: OpenClaw Outperforms Hermes
 With Hermes Models

Homelab Bakeoff: OpenClaw Outperforms Hermes
 With Hermes Models

Comments
11 min read
Debugging LACP Instability in a Transparent OPNsense Bridge

Debugging LACP Instability in a Transparent OPNsense Bridge

Comments
12 min read
Setting Up OpenClaw on ZimaCube: It's Easier Than You Think

Setting Up OpenClaw on ZimaCube: It's Easier Than You Think

Comments
2 min read
As a network noob, I built a subnet calculator I didn't need

As a network noob, I built a subnet calculator I didn't need

Comments
4 min read
Building a Real Cybersecurity Lab on Your Laptop

Building a Real Cybersecurity Lab on Your Laptop

1
Comments
3 min read
His AI Said 'Swap the PSU.' He Said 'One More Test.'

His AI Said 'Swap the PSU.' He Said 'One More Test.'

Comments
15 min read
Do You Have a Homelab? Secure Your Local LLM Artifacts

Do You Have a Homelab? Secure Your Local LLM Artifacts

Comments
5 min read
Your NAS Is Loud Because of Docker (and How to Fix It)

Your NAS Is Loud Because of Docker (and How to Fix It)

Comments
5 min read
Port Forwarding Explained Like You're 12 (And Why Every Hacker Learns It)

Port Forwarding Explained Like You're 12 (And Why Every Hacker Learns It)

Comments
4 min read
Setting up an e-paper dashboard with OpenDisplay

Setting up an e-paper dashboard with OpenDisplay

Comments
7 min read
Your NAS Is Loud Because of Docker (and How to Fix it)

Your NAS Is Loud Because of Docker (and How to Fix it)

Comments
1 min read
Building a Compute Node and Debugging My Assumptions

Building a Compute Node and Debugging My Assumptions

Comments 1
8 min read
Qwen Is Not Yet Ready to Power Local OpenClaw Deployments

Qwen Is Not Yet Ready to Power Local OpenClaw Deployments

Comments
7 min read
Tailscale + k3s in a 2‑node homelab: why I use Tailscale ONLY for the control plane

Tailscale + k3s in a 2‑node homelab: why I use Tailscale ONLY for the control plane

Comments
4 min read
I Didn't Write a Single Line of Code. I Built It Anyway.

I Didn't Write a Single Line of Code. I Built It Anyway.

Comments
6 min read
👋 Sign in for the ability to sort posts by relevant, latest, or top.