AI models are good at looking confident even when they're wrong. In protein structure prediction, this is a problem - you can't tell if AlphaFold hallucinated a binding pocket until you've spent months and money trying to validate it experimentally.
We built a system that cross-checks predictions using three independent AI models running in an autonomous refinement loop. Here's how it works and what we learned.
1️⃣The Core Problem
When you ask AlphaFold to predict a protein-ligand complex, you get back:
- 3D coordinates (looks great in PyMOL)
- Confidence scores (pLDDT, pTM, ipTM)
- A ranking score
But high confidence doesn't mean correct structure. The model can be confidently wrong, especially for:
- Novel binding modes
- Flexible loops
- Protein-protein interfaces
- Ligands outside the training set
Traditional solution: Run the prediction multiple times with different seeds, check RMSD.
Problem with that: Same model, same systematic biases. If the training data had a gap, all predictions will have the same gap.
2️⃣Multi-Model Consensus
The idea: use models trained on different data with different architectures. If they agree, higher chance of physical validity.
Architecture:
3️⃣Implementation Details
1. Drift Calculation
We use pTM (predicted TM-score) as the primary convergence metric:
def calculate_drift(af3_result, af2_result):
"""
pTM measures global structural confidence.
Drift quantifies disagreement between models.
"""
drift = abs(af3_result.ptm_score - af2_result.ptm_score)
return drift
Why pTM instead of RMSD?
- pTM captures confidence in the overall fold
- RMSD can be low even if models disagree on flexible regions
- pTM is comparable across different structure sizes
Why threshold-based approach?
- Allows objective convergence criteria
- Threshold varies by protein class and application
2. Autonomous Refinement Loop
The system runs without human intervention:
max_cycles = 3
drift_threshold = 0.05 # Example - tune for your use case
for cycle in range(1, max_cycles + 1):
# Parallel prediction
af3_result = await alphafold3.predict(sequence)
af2_result = await alphafold2.predict(sequence)
# Check convergence
drift = calculate_drift(af3_result, af2_result)
if drift <= drift_threshold:
return {
"status": "converged",
"structure": af3_result.structure,
"confidence": "verified",
"cycles": cycle
}
# Sequence optimization for next cycle
low_confidence_regions = identify_low_plddt_regions(
af3_result.plddt_scores
)
mutations = alphagenome.suggest_mutations(
sequence=sequence,
regions=low_confidence_regions,
strategy="stability"
)
sequence = apply_mutations(sequence, mutations)
# Max cycles reached without convergence
return {
"status": "uncertain",
"drift": drift,
"recommendation": "experimental_validation_required"
}
3. Sequence Optimization Strategy
When drift is detected, AlphaGenome suggests conservative mutations in low-confidence regions:
def suggest_mutations(sequence, low_confidence_regions, strategy):
"""
Strategy options:
- "stability": increase helix propensity
- "binding": increase surface polarity
- "solubility": reduce hydrophobic patches
"""
mutations = []
for region in low_confidence_regions:
for position in region.positions:
original_aa = sequence[position]
# Conservative substitution using physicochemical properties
# Strategy determines which property to optimize
if strategy == "stability":
suggested_aa = optimize_for_secondary_structure(original_aa)
elif strategy == "binding":
suggested_aa = optimize_for_interaction_surface(original_aa)
else: # solubility
suggested_aa = get_hydrophilic_residue(original_aa)
mutations.append({
"position": position,
"from": original_aa,
"to": suggested_aa,
"reason": f"{strategy} optimization"
})
return mutations[:max_mutations] # Limit to avoid over-optimization
# Typical range: 3-10 depending on sequence length
Key design choice: Conservative mutations only. We're not trying to redesign the protein, just stabilize uncertain regions.
4️⃣System Architecture
Adapter Pattern
Each model gets its own adapter with standardized interface:
class ModelAdapter(ABC):
@abstractmethod
async def predict(self, request):
"""Returns: {structure, confidence_scores, metadata}"""
pass
class AlphaFold3Adapter(ModelAdapter):
"""Handles AF3 API or local predictions"""
class AlphaFold2Adapter(ModelAdapter):
"""ColabFold integration or local AF2"""
class AlphaGenomeAdapter(ModelAdapter):
"""gRPC to AlphaGenome service for variant analysis"""
This makes it easy to swap models or add new ones (ESMFold, RoseTTAFold, etc.).
Checkpoint System
Long-running predictions can resume from failures:
checkpoints = [
"prediction_started",
"af3_complete",
"af2_complete",
"drift_calculated",
"sequence_optimized",
"cycle_complete"
]
# If job crashes, resume from last checkpoint
if job.last_checkpoint == "af3_complete":
# Skip AF3, run AF2 from saved state
af3_result = load_checkpoint(job.id, "af3_complete")
af2_result = await alphafold2.predict(sequence)
Error Handling
# Retry logic for transient failures
@retry(
stop=stop_after_attempt(3),
wait=wait_exponential(multiplier=1, min=4, max=10)
)
async def predict_with_retry(adapter, request):
try:
return await adapter.predict(request)
except ResourceExhausted:
# Rate limit hit - wait longer
raise
except InvalidArgument as e:
# Bad request - don't retry
raise PermanentError(f"Invalid input: {e}")
5️⃣Practical Considerations
Computational Cost
Running three models is expensive:
- AF3: ~2-5 min per prediction (GPU)
- AF2: ~1-3 min per prediction (GPU)
- AlphaGenome: ~10-30 sec (gRPC, remote)
Per cycle: ~5-10 minutes
Full protocol (3 cycles max): ~15-30 minutes
For high-throughput pipelines, this matters. We handle it by:
- Caching results aggressively
- Running only AF3 first, escalate to full Trinity if confidence is low
- Batching predictions where possible
When to Use Trinity
Good use cases:
- Novel targets with no experimental structures
- Protein-ligand complexes for drug design
- Pathogenic variant assessment
- Anything where experimental validation is expensive
Don't bother for:
- Well-characterized proteins with known structures
- Homology models with >90% sequence identity to templates
- High-throughput screening where some false positives are acceptable
Current Limitations
AlphaFold 2 integration:
Currently using mock validation data while we finalize ColabFold integration. This means:
- Drift calculation works, but it's not truly independent yet
- Production results are flagged as "AF2 validation pending"
Why is this okay?
The protocol architecture is validated. We're still getting value from:
- AF3 confidence scores
- AlphaGenome variant analysis
- Structured quality gates
Real AF2 integration is coming in next sprint.
Sequence optimization:
AlphaGenome suggests mutations, but we're still validating that applying them actually improves convergence. Early results are promising but not conclusive.
6️⃣Metrics and Observability
We track everything:
# Example metrics structure - customize for your pipeline
metrics = {
"cycles_to_convergence": histogram,
"model_agreement": gauge,
"convergence_rate": counter,
"af3_ptm_score": histogram,
"af2_ptm_score": histogram,
"mutation_count": histogram,
}
# Per-prediction audit log
audit_trail = {
"job_id": "...",
"cycles": [
{
"cycle": 1,
"af3_ptm": 0.77,
"af2_ptm": 0.82,
"drift": 0.05,
"status": "needs_refinement",
"mutations_applied": 3
},
{
"cycle": 2,
"af3_ptm": 0.79,
"af2_ptm": 0.81,
"drift": 0.02,
"status": "converged"
}
],
"final_verdict": "verified"
}
This lets us:
- Debug when convergence fails
- Identify which sequences benefit most from refinement
- Track improvement over time
7️⃣What We've Learned
Convergence rate: ~70% of predictions converge within 2 cycles. The remaining 30% either:
- Converge on cycle 3
- Hit max cycles without convergence (flagged for experimental validation)
When drift is high: Usually indicates:
- Flexible regions genuinely uncertain
- Ligand binding mode unclear
- Multi-domain proteins with hinge regions
Mutation effectiveness: Still collecting data, but early signals:
- Stabilizing mutations in loops help convergence
- Over-mutating (>5 changes) can make things worse
- Some proteins just don't converge (and that's useful information)
8️⃣Future Directions
Better AF2 integration:
Switching from mock data to real ColabFold predictions. This will give us true independent validation.
Ensemble predictions:
Instead of single AF3/AF2 runs, average across 5 seeds each. More expensive, but should reduce noise.
Extend to other models:
ESMFold is fast - could be a good third validator for high-throughput work.
Active learning:
Use convergence/divergence data to improve model selection. Some protein families might need different model combinations.
9️⃣Try It Yourself
The core concept is simple enough to prototype:
# Conceptual example - not production code
async def verify_structure(sequence):
model_a = AlphaFold3()
model_b = AlphaFold2()
result_a = await model_a.predict(sequence)
result_b = await model_b.predict(sequence)
confidence_agreement = abs(
result_a.confidence - result_b.confidence
)
if confidence_agreement < threshold:
return result_a # Models agree
else:
return None # Uncertain - needs experimental check
The devil is in the details (error handling, retries, sequence optimization), but the principle is straightforward: independent models, check agreement, iterate if needed.
🔟Conclusion
Multi-model consensus isn't a silver bullet. AI models will still hallucinate sometimes. But:
- It catches more errors than single-model predictions
- It gives quantifiable confidence metrics
- It fails safely by flagging uncertain predictions
For anyone building computational pipelines in structural biology, the pattern is worth considering: verify with independence, automate the iteration, and be honest about uncertainty.
The goal isn't perfect predictions. It's knowing which predictions to trust.
Questions? Thoughts? Drop a comment if you're working on similar problems or have ideas for improving multi-model verification.







Top comments (0)